RockBLOCK 9602 FTDI to USB Cable (1.8m)
RockBLOCK 9602 FTDI to USB Cable (1.8m)

Description

The RockBLOCK 9602 FTDI to USB Cable connects a RockBLOCK 9602 board to your computer for development, configuration, and testing.

 

It gives you a USB-to-serial link using an FTDI FT232RQ interface, so you can communicate with the RockBLOCK 9602 from standard terminal software. The 6-way 0.1" connector plugs into the board header and provides both serial access and power from a USB port.

 

Use it when you want to send AT commands, check modem behavior, test SBD messaging, or prototype with a RockBLOCK 9602 without building your own USB-to-UART interface.

Key Features

  • Integrated FTDI Chipset: Employs an onboard FTDI FT232RQ USB-to-Serial UART interface IC for hardware-level protocol handling.
  • Standardized Terminal Pitch: Uses a 6-way 0.1″ pitch single inline connector for secure link-ups with target headers.
  • Precise Signal Regulation: Delivers consistent +3.3V TTL logic level signalling to protect critical interface inputs.
  • Direct Bus Power: Supplies operating power directly over the host USB connection to minimize lab bench clutter.
  • Extended Deployment Length: A physical 1.8-meter cable length provides separation between host machines and satellite testing rigs.
  • Zero Wire Overhead: Eliminates manual pin-mapping and individual jumper routing during prototype stages.

Tech Specifications

  • Cable Length: 1.8 meters (approx. 6 feet)
  • Onboard IC: FTDI FT232RQ USB to Serial UART interface IC
  • Connector Profile: 6-way single inline configuration
  • Pin Pitch: 0.1″ (2.54mm) spacing
  • Logic Signalling: +3.3V TTL level
  • Interface Protocol: Serial UART-to-USB conversion
  • Input Voltage: Standard 5V DC from host USB port
  • Hardware Target: RockBLOCK 9602 (MK2) direct headers

RockBLOCK 9602 FTDI to USB Cable (1.8m)

ACC-RB-9602-USB-CAB

$35.00
$35.00
Sale Sold out
Taxes included.
Inquire